首页 > 行业知识 > 内容

行业知识

IndustryDetail

真假四轴雕刻机

编辑:深圳市天成鑫力数控设备有限公司时间:2018-05-15

       四轴雕刻机 相信有不少有需要做圆柱立体雕刻需求的雕刻机客户对于四轴雕刻机和假四轴雕刻机有不少的疑问,今天就给大家解释一下真四轴雕刻机和假四轴雕刻机的区别。


       Four axis engraving machine Believe that there needs to be done a lot of cylindrical three-dimensional carving carving machine customer demand for four axes engraving machine and fake four axis engraving machine has a lot of questions, today will give you really explain the four axis four axes engraving machine engraving machine and false distinction.


       首先我们必须明白何谓四轴雕刻机?所谓四轴雕刻机,其实就是指X、Y、Z、A(也有人叫C,其实就是个叫法问题)四轴是联动的,也就是说这四轴是可以同时运动。


       First we have to understand what is a four-axis engraving machine? The four-axis engraving machine refers to X, Y, Z, A (also called C), and the four axes are interconnected, which means that the four axes can move at the same time.


      而假四轴雕刻机在雕刻过程中,其实真正动的就是三个轴,也就是说雕刻机雕刻的时候只是绕着轴心转动雕刻。


In the process of carving, the four axis engraving machine actually moves the three axes, which means that the engraving machine is only rotating the carvings around the axis.


      相信有不少雕刻机的老用户都听说过或者接触过用三轴的机器加上旋转轴的雕刻机,看起来这就是四轴了,这种雕刻机一般会被用来做圆柱浮雕,也就是在圆柱体的面上做浮雕雕刻,木质的跟石材的材料居多,比如鼎鼎大名的盘龙柱,有一些就可以通过这种三轴加旋转轴的雕刻机来实现。


      Believe there are quite a few old engraving machine users have heard of or contact with three axis machine engraving machine combined with the rotation axis, look this is four axis, the carving machine is normally used for cylindrical relief, which is in the cylinder surface relief carving, wood and stone materials, such as the famous panlong column, there are some can through this three axis and axis of engraving machine.


      但是事实上,有了四个轴的雕刻机跟真正意义上的四轴雕刻机是有很大的区别的。四个轴的雕刻机,只有配上专门的四轴系统,绘制专门的刀路,才能够称得上是真正的四轴雕刻机,也才能够完成只有四轴雕刻机能够完成的工作——圆柱立体雕刻。


      But in fact, there's a big difference between a carving machine with four axes and a real four-axis carving machine. Four axis engraving machine, only with special four axis system, drawing special knife road, can only be called four axes engraving machine is a real, also can complete only four axes engraving machine can work - cylindrical three-dimensional sculpture.


      举个圆柱立体雕刻比较常见的例子,由一根圆形短木棍雕刻出一个立体的佛像来,这样的雕刻就是圆柱立体雕刻,这样的工作,有四个轴但是用的三轴系统,也就是用x轴或者y轴来驱动旋转轴,真正工作的时候就是三轴联动的雕刻机是没办法完成的。


      For an example of cylindrical three-dimensional carving are common, by a circular short wood carving out a three-dimensional figure of Buddha, this sculpture is cylindrical three-dimensional sculpture, such work, but there are four axis with triaxial system, also is to use the x or y axis to drive the axis of rotation, the real work is triaxial linkage carving machine is not finished.